服务项目 | 浏览量0 | 发布时间2013-11-10 |
品牌未填 | 所在地 | 起订≥1 立方 |
供货总量未填 | 发货0天内发货 | 有效期至2025-03-09 |
The CT1 Current Probes are designed for permanent or semi-permanent in-circuit installation. Each probe consists of a current transformer and an interconnecting cable. The current transformers have a small hole through which a current carrying conductor is passed during circuit assembly.
The P6041 Probe Cable provides the connection between the CT1 Current Transformers and a BNC oscilloscope input. A 50 Ω termination is required to terminate the cable when connected to a high-impedance (1 MΩ) oscilloscope input. One probe cable can be used to monitor several current transformers that have been wired into a circuit.
Bandwidth (typical) |
25 kHz to 1 GHz |
Rise Time |
350 ps |
Sensitivity(into 50 Ω) |
5 mV/mA |
Accuracy |
±3% |
Magnetizing Inductance |
6 μH |
Leakage Inductance |
2.4 nH |
Insertion Impedance: |
|
at 10 MHz |
<1 Ω |
at 100 MHz |
2 Ω |
at 1 GHz |
|
Max. Bare Wire Size |
#14 wire |
1.78 mm (0.070 in.) |
|
Max. Bare Wire Voltage: |
|
RMS |
175 VRMS CAT I |
Peak |
1000 V*1 |
DC |
175 V |
Max. Peak Pulse Current |
12 A |
Max. Continuous Current (RMS) |
450 mA |
Amp-second Product |
1 × 10-6 A*Sec |
L/R Time Constant (droop) |
>6.35 μs |
Propagation Delay |
3.25 ns |
*1 (<3.25% Duty Factor).