TCP0030A 电流探头

使用微信扫描二维码分享朋友圈，成交更快更简单！

TCP0030A is a high-performance, easy-to-use AC/DC current probe designed for use and direct connection to oscilloscopes with the TekVPI™ probe interface. This AC/DC current measurement probe provides greater than 120 MHz of bandwidth with selectable 5 A and 30 A measurement ranges. It also provides exceptional low-current measurement capability and accuracy to current levels as low as 1 mA, important for meeting today's challenging current measurement needs.

KEY FEATURES

• Easy-to-use and accurate AC/DC current measurements
• Intelligent communication with TekVPI™ oscilloscopes provides:
  • Units scaling and readout. Automatic, on-screen readout of amps and magnitude. Manual setup is not required. Hand calculation from volts to amps is unnecessary
  • Push button degauss and Autozero functionality
  • Probe status and diagnostic indicator LEDs
  • Remote GPIB/USB probe control
• Split-core construction allows easy circuit connection
• High accuracy with typically less than 1% DC gain error
• Low noise and DC drift
• 3rd party safety certification

KEY PERFORMANCE SPECIFICATIONS

• DC to >120 MHz bandwidth
• 30 A RMS maximum current capability
• 50 A peak pulse current capability
• High accuracy with typically less than 1% DC gain error
• Accurately measures current levels as low as 1 mA

• ELECTRICAL CHARACTERISTICS

  Bandwidth

  DC to ≥120 MHz

  Rise time

  ≤2.92 ns

  Maximum DC current

  30 A

  Maximum RMS current

  30 A

  Maximum peak pulse current

  50 A

  Maximum bare wire voltage

  150 V CAT II, (insulated wire 300 V CAT II)

  Sensitivity

  1 mA (on oscilloscopes that support 1 mV/div setting)

  DC accuracy

  ±1% typical

  ±3% warranted

  Maximum Amp-Second product

  500 A*µs (in 30 A range)

  Insertion impedance

  1 mΩ at 10 kHz

  3.5 mΩ at 100 kHz

  0.08 Ω at 1 MHz

  0.15 mΩ at 10 MHz

  0.7 Ω at 100 MHz

  0.85 Ω at 120 MHz

  Signal delay

  14.5 ns

  Current ranges

  5 A and 30 A

  Power requirements

  TCP0030A is powered directly by oscilloscopes with the TekVPI™ interface.