正压输送可扁平盘卷软管

使用微信扫描二维码分享朋友圈，成交更快更简单！

立塑聚氨酯（TPU）夹布软管：采用特殊的挤出技术“一次成型”工艺，由聚醚TPU内胶层、中间纤维、高强涤纶长丝、圆织增强层和TPU外胶层组成。材质环保、耐老化、耐水解、无毒无味、耐高底温、抗撕拉性好、耐磨、耐刮、产品口径大、流量大、承压高、输送效率高，工作压力可达1.0-3.0MPa，拉断强度在15吨以上。比橡胶管和钢管重量轻、承压强、输送效率高、质地柔软，可盘卷、操作方便、铺设及撤收速度快、机动灵活、环境适应性强、使用安全可靠和经久耐用、免维护、无需清洁或干燥，使用寿命长，耐磨耗、耐刮擦，可在砂石、水泥等或是其它比较恶劣的环境下使用，内壁光滑，水流阻力小，在承压状态下的伸长率几乎为0，防止水带扭曲导致水流阻力增大和水带的磨损，耐热，耐燃油、化学品、紫外线、臭氧、水、微生物等。
Li SU polyurethane (TPU) fabric hose: using extrusion technology "special forming a" process, from polyether TPU internal rubber layer, intermediate filament 、high-strength polyester filament fabric, circular enhancement layer and TPU cover. The material of environmental protection, aging resistance, hydrolysis resistance, non-toxic and tasteless, high bottom temperature, anti tear property, abrasion resistance, scratch resistance, good product of large caliber, large flow, high pressure, high transmission efficiency, working pressure up to 1.0-3.0MPa, tensile strength of over 15 tons. Compared with the rubber pipe and steel pipe with light weight, strong bearing, high transmission efficiency, soft texture, prehensile, convenient operation, laying and withdrawing speed, flexibility, strong adaptability to the environment, the use of safe and reliable and durable, maintenance free, no need to clean or dry, long service life, wear resistance, scratch resistance in sand, cement, or use other adverse circumstances, smooth inner wall, small flow resistance, the pressure state of elongation is almost 0, to prevent the water led to the distortion of wear, water resistance and heat resistance of hose, fuel, chemicals, ultraviolet light, ozone, water, microorganism.