二流体雾化喷枪

使用微信扫描二维码分享朋友圈，成交更快更简单！

sncr脱硝喷枪产品介绍CSNCR系列喷枪有三种流量款式

设计特点

1、SNCR喷枪上的喷嘴使用大流量的空气雾化型喷嘴，拥有多级雾化效果，在火力发电厂除尘脱硫脱硝，化工厂、水泥厂和除尘环保工程都有广泛应用；

2、采用双流体喷嘴，并使用蒸汽或空气做第二流体；

3、在最恶劣的环境中，效率很高设计以及三级雾化仍能用最少的压缩空气使用量达到好的雾化性能；

4、内部装有螺旋喷嘴为第二级雾化喷嘴，螺旋喷嘴的大孔径流通通道设计可有效防止堵塞等恶劣的流体环境。

SNCR系列喷枪的标准材质:316不锈钢钴合金6耐磨护套。如需其他材质，请注明管径、连接方式、喷嘴号、喷雾角度和材料。

      角度:20°、60°、90°

      流量：2.0-80L/min

      材质：303、316、310不锈钢，哈氏合金

      喷雾形状：空心锥形、实心锥形、扇形

SNCR denitration gun series product introduction CDE gun there are three kinds of flow pattern, 

Design features

1, SNCR spray gun nozzle on the use of large flow type air atomizing nozzle, with multistage atomization effect, dust removal desulfurization denitration in coal-fired power plants, chemical plants, cement plants, and dust environmental engineering has a wide application;

2, with double fluid nozzle, and use of steam or air to do a second fluid;

3, in the worst environment, high efficiency design and tertiary atomization can still use the least amount of compressed air atomization performance usage is the highest;

4, inner is equipped with spiral nozzle for secondary atomization nozzle, screw nozzle of large aperture distribution channel design can effectively prevent the blockage of bad fluid environment.

Of SNCR gun series standard material: stainless steel 316 cobalt alloy wear resistant sheath 6.If you need other materials, please indicate the diameter, the connection way, nozzle number, spray Angle and materials.

     上海斐卓Feizhuo脱硝喷枪特点：

     选用特种钢材——材质具耐高温（耐热温度1250℃）、耐磨损、耐酸碱等特性，经特殊处理工艺加工而成，确保喷枪品质。

      良好雾化效果——雾滴颗粒在30～70μm，雾场喷射距离从1200mm～7500mm，雾场穿透能力强，混合均匀，确保脱硝率。

      独特降温设计——为避免喷枪长期在850℃～1050℃的高温环境下工作，固定式喷枪设计了独特的降温保护功能，大大延长了喷枪的使用寿命。

      停用防堵功能——喷枪设计了停用防堵功能，确保喷枪在高温、高浓度粉尘、复杂的气流环境中即使不抽出喷枪也不致堵塞。

      人性化设计——喷枪外观简洁，快装连接设置，安装、检修更方便，设备运行更安全可靠。

      定制加工——可根据用户现场实际情况和客户要求设计、加工制作。

Shanghai Fei zhuo Feizhuo denitration gun features:

Use of special steel, material with high temperature resistance (highest heat-resisting temperature 1250 ℃), wear resistance, acid and alkali resistance and other properties, processed by special processing technology, ensure the quality of spray gun.

Good atomization effect -- particles droplets in 30 ~ 70 microns, the mist jet distance from 1200 mm to 7500 mm, fog strong penetrating power, mixing, ensure the denitration rate.

Unique cooling design - to avoid spray gun for a long time at 850 ℃ ~ 1050 ℃ high temperature conditions, fixed gun design a unique cooling protection function, greatly extend the service life of the gun.

Disable prevent function - gun held in design to disable function, to ensure that the spray gun at high temperature, high concentration of dust and complex air environment even if they don't pull out spray gun are not blocked.

Humanized design - gun appearance is concise, fast connection Settings, installation and maintenance more convenient, more safe and reliable equipment operation.

Custom processing, can design according to customer's actual situation and customer requirements, processing production.

氨水脱硝喷枪的特点：

1、产生平均粒径为70微米 “微雾”的二流体扇形喷嘴。

2、流量调整范围较大，且喷雾角度变动小。

3、喷雾形状全区域内的粒径均匀。

4、流量分布均等，适合于多数喷嘴排列使用，喷射距离远，穿透力强。

5、异物通过径大，不易阻塞。

6、结构简单，便于维护

7、可移动设计，安装拆卸更加方便快捷，大大节省安装、维修工作量。

8、喷枪可采用气缸推进系统，方便喷枪自动推进，延长喷枪使用寿命。

氨水脱硝喷枪主要用途：

1、 脱硝：氨水、尿素等还原剂的喷洒。

2、 冷却：锅炉尾气、铸件等的冷却。

3、 调湿：混凝土、废气加湿。

4、 焚烧：废水、废液的焚烧

The