服务项目 | 浏览量9 | 发布时间2017-09-25 |
品牌斐卓 | 所在地上海 松江 | 起订≥1 件 |
供货总量未填 | 发货0天内发货 | 有效期至2025-03-09已下架 |
FM雾化喷枪的部件
喷枪基本结构包含枪身、喷嘴套装(风帽、喷嘴和枪针,简称三件套)、控制部件和其它附件等(如图二)。为了能达到一个完美的喷涂效果,是离不开喷枪的核心部件的。喷枪的喷嘴套装(图三)通常是经过计算机检测和监控下生产的,一些负责任及专业的厂家更会对每套喷嘴套装进行手工调校,实操测试后组合成套的。因此,在更换喷嘴套装时,三件套严禁出现随意组合现象,否则,会影响完美的涂装效果。
FM Air atomizing incineration spray gun
焚烧喷枪简介焚烧系统
焚烧喷枪主要应用于脉冲抛式炉排
焚烧炉、机械炉排焚烧炉、流化床焚烧
炉、回转式焚烧炉和CAO焚烧炉等各种
类型的焚烧炉!焚烧炉原理是利用煤、
燃油、燃气等燃料的燃烧,把将要处理
的物体进行高温的焚毁碳化,以达到消
菌的目的。而焚烧喷枪主要是用来进行
废液雾化,有以下优点:
1、采用内部混合式双流体雾化,其混
合程度、雾化效果、燃烧速度效率极高,
过剩空气系数低,可节约大量燃料;
2、雾化喷头口径大,对流体粘度、杂质水平喷射
含量要求不高,不易堵塞;采用低压喷
雾方式,较高压喷枪式安全,不易磨损,
不易故障,燃烧效果好,雾化介质可用
低压蒸汽或空气;
3、根据其焚烧工艺,焚烧喷枪也可用
在特有的流化床锅炉进行焚烧,满足众
多的应用要求。 焚烧喷枪实物图
竖直喷射
斐卓Feizhuo气动式伸缩喷枪性能特点
1、 雾化均匀——喷雾全区域的粒径分布均匀,为液体的均匀蒸发和吸收反应提供了非常优越的保证。平均颗粒直径只有60μm,粒径120μm。
2、 运行成本更低——低气水比是此款喷枪的优点,长时间使用更能节省运行成本。
3、 气动伸缩装置——喷枪采用气动伸缩装置,喷枪不运行时可以自动退出炉内,易于喷枪的维护,大大延长了喷枪的使用寿命。
4、 流量范围广——流量范围从3L/h—400L/h,可以满足各种流量需求。
5、 使用寿命长——因喷嘴是在低压环境下工作,水压气压都不超过0.6Mpa,所以对喷嘴磨损很小,而喷枪亦可带保护套管,喷嘴置于保护套管内,能够更好保护喷嘴,从而大大延长使用寿命。
角度:20°
流量:0.05-6.67L/min
材质:304、310不锈钢,哈氏合金
喷雾形状:空心锥形、实心锥形、扇形产品介绍
The Fijian zhuo Feizhuo pneumatic telescopic spraying performance characteristics1, uniform atomization, spray the whole area of uniform particle size distribution, provides the uniform liquid evaporation and absorption reaction is very superior.The average particle diameter of only 60 mu m, maximum particle size of 120 microns.
2, lower operation cost, low gas water ratio is the advantage of this spray gun, use for a long time can save running cost more.
3, pneumatic telescopic device, pneumatic telescopic device for the gun, spray gun not runtime can automatically come back inside, easy to spray gun maintenance, greatly extend the service life of the gun.
4, wide flow range - flow range from 3 l/h, 400 l/h, can satisfy all kinds of traffic demand.
5, long service life, because of the nozzle is working under low pressure environment, hydrostatic pressure no more than 0.6 Mpa, so wear of nozzle is small, and the spray gun can protect casing, nozzle inserted in case, can better protect the nozzle, thus greatly extend the service life.