实心喷嘴

使用微信扫描二维码分享朋友圈，成交更快更简单！

H-VV喷嘴过滤器主体是用黄铜或不锈钢制成的，滤网是304不锈钢制作的。这些过滤器适用于所有1/8vv或1/4VV喷嘴。他们为滤出体积太大，难以通过喷嘴的颗粒提供了有效的手段。

射流稳定器装在扇形喷嘴上，用于增加喷射距离和增强冲击力。当喷嘴安装在T型管上，分支管，或者弯管上时，液体拐弯进入喷嘴就会产生涡流，这种涡流能够破坏喷射的均匀 性，射流稳定器把涡流减小到更低程度，并通过把射流集聚为更薄，更稳定 的方式，增加喷射距离，增强冲击力。

H - VV nozzle filter main body is made of brass or stainless steel, the mesh is made of 304 stainless steel.These filters are applicable to all 1/8 vv or 1/4 vv nozzle.They to filter out the volume is too big, difficult to through the nozzle particles provides an effective way.

Jet stabilizer on the fan nozzle, used to increase the jet distance and enhance the impact.When the nozzle is installed on the T tube, pipe branch, or bent pipe, the liquid turned into the nozzle can produce eddy current, the uniformity of the eddy current can damage jet, jet stabilizer to minimize the degree of the eddy current, and through the jet agglomeration is thinner, more stable way, increase the jet distance, enhance the impact.

单元组合式实心锥形喷嘴TG设计特点：

TG系列实心锥形喷嘴具有实心锥形喷嘴的所有优点，比如可互换的喷组过滤器，止回阀和旋转过滤器，而且还可在实心锥形喷头效果的低流量范围内选择不同的流量。

TW-G广角实心锥形喷头效果在全部喷射区域内呈均匀的中粗液滴，在要求完全覆盖喷射的场合应用效果很好。该广角喷头是实体锥状喷射，喷射区域呈圆形，喷射角在102°到120°之间，有较大的低流量选择范围。

choose different traffic.

TW - G wide-angle solid cone nozzle effect in all injection of homogeneously in the area of thick liquid droplets, requiring full coverage injection in application effect is very good.The wide-angle spray is a solid cone jet, jet area is circular, jet Angle between 102 ° to 120 °, with low flow range.

不锈钢螺旋喷嘴采购_喷嘴厂_上海斐卓Feizhuo

螺旋实心锥形喷嘴HHSJ系列喷雾形状为实心锥形，喷射角度为60°-170°。喷嘴顶部设计为麻花扭转型，这种紧凑的设计能够很大程度上减少阻塞现象。使用于绝大多数管道系统，采用螺纹连接（NPT/BSPT）；在3公斤压力下流量可达5.5L/MIN-4140/MIN。