钢制拖链

使用微信扫描二维码分享朋友圈，成交更快更简单！

1、钢铝拖链http://www.hengtonght.com产品产地：德州恒通     
2、产品特性：TLG型钢制拖链可承载数量多，重量大的电缆及油管，自由悬置（允许不用支撑轮）长度大，支持板可依客户需要制作，适用于工作母机，移动机器等。TLG型钢制拖链可带塑料隔条，可随意移动调节位置，进行多种分割。支撑板宽度在高达1200mm时，仍可在确保内置电缆处于最佳保护状态的条件使之做最高速度的移动。http://www.ht218.comTLG 型钢制拖链可根据客户的需随时加装银色护板，实践证明此装置在非人为故意破坏前提下至少可经受15年以上的考验。产品外部和内部均可安装弹性钢带，以保护内置电缆和保持内部的清洁，安全可靠。
3、产品型号：齐全，可根据客户要求定做。http://www.ht612.com

TLG drag chain    Character:
  The TLG drag chains are suitable for installing a large quantity and heavy duty of cables and oil pipes which allow suspending installation (supporting is not allowed)and is lengthy.The supporting plate can be made according to the users requirements.It is suitable for machine tools and moving machines.Their bebt radius ranges from 50-600mm and the chains height is from 35 to 150mm.users can
make a free selection of them.
  The TLG type drag chains have a max travel range of 32 meters and suitable for all kind of transmissions.It can freely be made longer or shaort.In addition,the bend radius can be changed by changing the pin shaft.
  The TLG width of the supporting board is from 150mm to 600mm.the distance between the holes is 5mm.
  The height of the supporting board depends on the max.outside diameter of the cable.When the machine tool is working in the highest speed and if the max the width of the drag chain is longer than 4m,onesize larger than normal should be selected just out of considerationof safety.
  The bend radius should be selected according to the max.diameter of a cable and should be 10 times of the cable used.The bend radius can be selected as 50-600mm according to the given table.Small radius should be selected for those ones with small travel range.
  Drag chain length=1/2travel range+4 bend radius,this is only used for the fixed connection which is located at the middle point of the travel range.
  The fexation of the drag chains can be done according to the machine tools.The angle steel can be put in the outer or the inner,in other words,in the inner side of the chains of in the oute side.In common cases,it is in the inner side of the chains and face towards outside.