布拉玛FD1火焰探测器

使用微信扫描二维码分享朋友圈，成交更快更简单！

FD1系列火焰探测器
品牌：Brahma（布拉玛）

产地：意大利
 
 产品介绍
The combustion process, depending on the type of fuel used, emits more or less light radiation belonging to the ultraviolet, visible or infrared spectrum. Of course, gas oil combustion generates a very bright flame, which is easily detectable by means of sensors using common photocells; nevertheless, at the same time gas oil combustion generates a quantity of substances not completely burnt (unburnt substances), which pollute and also dirty the combustion chamber step by step. By suitably adjusting the combustion, it is possible to solve this problem and improve the flame quality, making it similar to the flame produced by gas, natural gas or propane combustion (blue flame).

Since photocells are not sensitive to blue flame light, in most gas burners the presence of flame is detected by exploiting the ionization principle; to this purpose, you simply need an electrode (electrically isolated metal rod) suitably "immersed" in the flame. This principle is not easily applicable in oil burners, as the electrode immersed in the flame gets dirty quickly (consequently losing its efficiency) and modifies the turbulence in the combustion chamber, thus creating serious problems.

For all these reasons, it is necessary to detect the presence of flame by means of ultraviolet sensitive detectors.

The FDx sensor uses a silicon preamplified active element, specifically designed for blue flame burner applications; the UV light peak detection of this sensor is around 310 nm. Thanks to the incorporation of suitable electronic components, this device can be fitted to the BRAHMA control boxes of the EUROBOX, EUROFLAT, MINIFLAT, MICROFLAT and EUROGAS series (suitable for gas burner applications); moreover, this sensor is particularly well fitted for the control boxes type GR1, GR1/Z and GR2 of the EUROOIL series and for any control boxes of the OIL-SYSTEM series (suitable for oil burner applications).

In order to meet the widest range of market requirements, this device is available in the FD1 version (with front view) and in the FD2 version (with lateral view). Please note that the FDx detector is sensitive to the ultraviolet component of visible light; therefore, its use is recommended in burners fitted with closed combustion chambers and in an application environment perfectly shielded from visible light.
 
 技术参数
主电压 220-240V / 50...60Hz
功率 1V
可见光波长 290...350nm
可见光角度 8º
最大输出电流 500uA
工作温度 -20ºC...+60ºC
环境湿度 95%

上海锐弓机电设备有限公司  刘先生 M:18702107374 13816031344 15921794872 T: 021-60910744 / 61456847  F:021-60910282 QQ:1713611882  1398924276   本公司为专业燃烧器及配件代理商，代理及经销的燃烧机整机品牌有：
利雅路燃烧器、百得燃烧器、、意高燃烧器、贵诺燃烧器、百通燃烧器，威索燃烧器,美国豪科,将军，能量，欧科，欧瑞特，美国midco燃烧机
代理和经销的燃烧机配件品牌有： 利雅路全套配件、威索全套配件、百得燃烧器全套配件、百通全套配件、意高全套配件、水国全套配件
SUNTEC油泵、DANFOSS油泵、HAGO油嘴、西门子程控器、HONEYWELL程控器、电眼、火焰探测器、点火变压器、点火电极、油滤器、DUNGS燃气阀组、伺服马达、电磁泵、电磁阀、燃烧筒、火焰盘、风叶轮、比例调节仪、重油预热器等，型号齐全.
上海锐弓机电设备有限公司 专业从事热能设备行业，工业燃烧及控制、工业炉自动化、烟气分析和气体泄漏检测系统的集成，方案设计，以及设备的供货、调在业加热设备、工业热处理设备、锅炉、燃烧器等行业的最佳合作伙伴。